Intercom

Answering call from intercom stations

To answer call on in-unit hands-free intercom -- press and release the speak button:

After answering call, to open the entry where call has been made -- press the unlock button:

This will release the lock on the entry gate, and if your unit is accessed via a stairwell,

it will also release your stairwell door, for approx 5 mins.

If the call was made from the garage entry or garage exit, it will open the garage roller door.

Handsfree Internal Unit Features (Audio only unit)

1. Red LED indicates Silent mode (Bell volume turned down to minimum).

2. Bell volume adjustment/call exclusion

3. Incoming audio volume adjustment

4. Operating status two-colour red/green LED

5. Door lock key

6. Operating status two-colour red/green LED

7. Communication enabling/disabling key

8. Entrance panel/cycling key

9. Staircase light - NOT USED AT ATLAS

10. Microphone

11. Loudspeaker

Handsfree Internal Unit Features (Video and Audio unit)

1. Microphone

2. Red LED indicates Silent mode (Bell volume turned down to minimum).

3. Bell volume adjustment/call exclusion

4. Incoming audio volume adjustment

5. Display brightness adjustment

6. Display colour adjustment

7. Door lock activation and/or door status red LED

8. Door lock key

9. Operating status two-colour red/green LED

10. Communication enabling/disabling key

11. Entrance panel/cycling key

12. Staircase light - NOT USED AT ATLAS

13. Loudspeaker

14. 3.5”LCD display

Changing the ring tone on your in-unit hands-free intercom

The intercom panel has 16 different ring tones. To set the ring tone, follow the procedure in the below diagram.

Note to commence, hold the speak button for more than 3 seconds.

Silent ringer

Note that if the volume is turned all the way down, the intercom will be silent.

A red LED indicates if the intercom has been put on silent. Refer to the features diagrams above.